Multi Sampler Node

Plays a melody using one or more sample audio files.

For example, you can load a set of piano samples, connect a Piano Roll Node, and compose a custom melody from the piano roll to be played through this Node. To listen to the audio output, connect to an Audio Destination Node.

This Node is similar to the Sampler Node, but several samples can be loaded at once for a better playback quality.

Inputs

MelodyA melody to control the samples played.

Settings

Each sample has the following settings:

Sample pitchDefault sample pitch (for example, if the sample file is a C4 note, set this to C4).
NormalizeWhen set, the sample file is normalized with peak-normalization.
Allow pitch shiftIf set, the sample will be pitch-shifted automatically based on the sample pitch setting, and the pitch of the played note.
Min. pitchSets lowest pitch for which the sample is played (inclusive).
Max. pitchSets highest pitch for which the sample is played (inclusive).
Min. velocitySets lowest velocity value for which the sample is played (inclusive).
Max. velocitySets highest velocity value for which the sample is played (inclusive).
Play modeSets the sample play mode as:OncePlays the sound once.LoopPlays the sound in a loop.Continuous loopPlays the sound in a loop, with a continuously changing start time to produce a continuous playback experience.

Outputs

AudioThe produced audio stream.