Bandfader

Replaces input A with input B in the frequency band specified by the center knob and Sharpness input.

Mobile Setup Routine 4

Formant Filter

Formant Filter with 5 vowels and 5 vocals.

Multiband Filter

1 input, 8 outputs. Frequency, Sharpness, gain.

pitch to time

converts a pitch value to a time interval

Midi phased Sine wave

With midi reset

Old Telephone ring

Will you answer?

Bandpass chain 2

Same as old bandpass chain but takes whatever midi input to generate instances

Feedback Synth

Use a compressor!

idkk

🙂

Harmonic filters

Bandpass chain

A chain of bandpass nodes with sharpness 100. The spread is controlled by a series of melody velocity inputs which are then multiplied to create some incremental math. To use: 1. Takes constant note as input, so run during playback. 2. Adjust the ratio to change the spread, as it's the exponent to the index numbers. 3. You can replace the bandpass node with anything really and the logic will still work. Giving it an oscillator instead will recreate a modal oscillator. This is basically an array for whatever you put inside it. 4. If you want to reduce or increase the number of voices, also reduce or increase the velocity. Since it's from 1 to 10, you might have to change the internal logic to adjust to this new paradigm as the maths will change.