Divide Node

Divides an Audio/Control line with another.

Notes: this Node currently requires manually specifying the number of input channels. Division is done on a per-channel basis. The Divisor input does not support values outside the range of [-256, 256] at this time. Values outside this range are clamped (for example, 257 becomes 256). Consider using the Multiply Node to work around these limitations.




OutputThe division result.

Audio and Control lines (visualized with blue and purple, respectively) are both analogous to an analog signal.
They can be used interchangeably, and, for example, an Audio output (blue) can be connected to a Control input (purple), or vice-versa.